Home - Truck Upgrades - TRUCK BRAKE SYSTEM UPGRADES - Dodge Ram Diesel / Gas - EGR Complete C PAK Brake Upgrade Packages for Dodge Ram Diesel / Gas 1/2, 3/4 and 1Ton Pickups

EGR Complete C PAK Brake Upgrade Packages for Dodge Ram Diesel / Gas 1/2, 3/4 and 1Ton Pickups

EGR Complete C PAK Brake Upgrade Packages for Dodge Ram Diesel / Gas 1/2, 3/4 and 1Ton Pickups
108.00 lbs
Market price:
Our price:
Click here to be notified of price drops of this item
Core Charge

EGR Brakes Package C: Consists of one pair of Gas Slotted Rotors , Carbon Kevlar Pads and 2 liters of Hi-Temp Motul ABS 5.1 Brake Fluid, 2800 degree PasteLub,a pair of Super Duty Blue Printed Front Calipers, Rear Shoes and Larger Wheel Cylinders or Rear Brake Pads-(depending on your model). (Hold Down/Return Springs, Seals and S/S lines are not included in the C package, these extra items are optionally available-Contact CTS directly to order or include extra items needed in customer comment box).

1/2 Ton 1500 Series 2WD

Year  Package  C

94-99 $1048.12

00-01 $982.15

02-07 $882.79

1/2 Ton 1500 Series 4WD

Year Package C

94-99 $952.15

00-01 $887.79

02-07 $882.79

3/4 Ton 2500 Series 2 Wheel Drive.

Year Package C

88-93 Call

94-99 $1210.95

00-02 $970.79

03-07 $1006.79

3/4 Ton 2500 Series 4WD

Year Package C

88-93 (4500#) $970.15

94-99 (4500#) $970.15

00-02 $970.79

03-07 $1006.79

1 Ton 3500 Series 2WD (Single and Dual Rear Wheel)

Year Package C

88-93 $1014.55

94-99 (2/4 ABS) $1476.15

00-02 $970.79

03-07 $1006.79

1 Ton 3500 Series 4WD (Single and Dual Rear Wheel)

Year Package C

88-89 $1002.91

90-93 $1031.69

94-99 $970.15

00-02 $970.79

03-07 $1006.79
(Some Heavy Rotor Packages may add additional Freight Charges).



Gas-Slotted or Cross-Drilled vented OEM factory sized front rotors to provide more cooling surface area and provide pad out gassing. Featuring asymmetrical and directional vent pattern to provide cooler and longer lasting rotors. Virtually eliminating glazing, warpage and stress cracking. Providing better initial bite and superior heat dissipation.


Severe Service Blue-Printed Calipers with special phenolic or stainless steel pistons, high temp silicon seals and boots (depending on application), stainless steel or hard coated slider pins, high heat pin lube and required hardware. Double pressure tested and covered by a life time guarantee against manufacture's defects. These blue-printed remanufactured units feature hand fitted pistons, setting the "Hot Running" clearance so that as the piston(s) expand-no sticking or binding occurs. Providing superior performance and heat dissipation based on the piston upgrade and design. *Caliper Cores Must Be Returned to Avoid Additional Core Charge of $120.00*.

Pads & Shoes

Special Carbon Kevlar integrally molded Disc Pads and Brake Shoes. The latest technology now allows us to provide "State of the Art" Pads and Shoes! Heat cured to remove air pockets from the compressed friction material to eliminate brake noise and provide unsurpassed heat transfer. Utilizing Carbon Kevlar technology, the fiber strands in conjunction with metal particles combine to absorb vibration, a leading cause of brake noise. Allowing faster heat dissipation, a major cause of warped and stress cracked rotors. Quicker heat dissipation means less fade and less pedal pressure, which in turns results in less pad and rotor wear. The dynamic coefficient actually grips better as the temperature goes up. Our Carbon Kevlar pads and shoes provide unequaled stopping distances for heavy loads and high heat applications. And are the ultimate for heavy towing and load requirements. Available for most all vehicles and trailers as well.


DENSITY: 3.0 TO 3.2.

HARDNESS: 81.3 Rockwell.

MATERIAL: Carbon Kevlar Metallic and Ceramic

DYNAMIC COEFFICIENT: Cold application .425 increases to .485 when running at higher temperatures.

CONSTRUCTION: Utilizes ceramic inner layer between the friction material and the backing plate to reduce heat penetration to the brake fluid system.

Brake Fluid

Motul ABS 5.1 Synthetic Brake Fluid boasts extremely high boiling points: Dry 522 degrees And Wet 409 degrees, with exceptional recovery time, maintaining thermal viscosity. Virtually eliminates vapor lock and brake fade. Motul ABS 5.1 is fully miscible with synthetic brake fluids complying with SAE J1703, DOT 3,4, and 5.1, Which it can replace with out any special precautionary measures. Designed specifically for today’s ABS systems to Flow Fast in Cold Weather environments and provides Super Quick apply response in Hot Environments as well. Not to be used with mineral based or silicon fluids. (This is NOT Silicon Brake Fluid). Simply the best fluid available for high temperature and high performance braking systems.


Wheel Cylinders

Larger Wheel Cylinders available for some application (i.e. Dodge Ram, Ford & Chevy). These larger wheel cylinders provide more clamping force to the rear axle providing more stopping force and more heat dissipation in to the rear drums reducing the thermal load on the front braking system. 
  *Tell us what Model, Year, Engine, 2 or 4 WD, 2 or 4 Wheel ABS, Rear Disc or Rear Shoes, etc, etc you have in the customer comments section when checking out*
*Caliper Cores Must Be Returned to Avoid Additional Core Charge of $120.00*.


Send to friend

: *
: *
: *
Type the characters you see in the picture:

The code is case-sensitive and must be entered exactly as above.

Customers also bought

CTS Hub and Rotor Cover
WEHRS Narrow Steel Light Weight Bronze Quick Adjust Cage
Standard Wide 5 Hub Seal 10 PACK
CTS Steel Wide 5 Axle Tube
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. 

New Racing Parts and Equipment - Dirt and Asphalt Racing