The G6 is a small body mono-tube, non-adjustable gas shock absorber. It's available in 5" - 6" - 7" - 8" and 9" stroke and any possible valving or split valving. It has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.
Features
Super lightweight with large 38mm bore.
63mm built on gas reservoir.
10 turn per inch 2 - lead thread with adjusting nut locking grooves.
Positive stainless steel no-drag scraper to keep any dirt and debris out.
Hollow chrome-moly shaft.
Low friction Teflon lined self-lubricating 1/2 inch bearing on both ends.
The finest high quality, high viscosity index shock absorber oils.
Double checked low-speed valving design with ± .00004" precision components.
Coil Over Kit for G6 series with 1 7/8 springs - part number 3400
Coil Over Kit for G6 series with 2 1/2 springs - part number 3450
|
Series |
Extended Length |
Compressed Length |
Travel |
Weight |
|
G6 - 5" |
15 3/4 |
10 3/4 |
5 inch |
#1.9 |
|
G6 - 6" |
17 3/4 |
11 3/4 |
6 inch |
#2.1 |
|
G6 - 7" |
19 3/4 |
12 3/4 |
7 inch |
#2.2 |
|
G6 - 8" |
21 3/4 |
13 3/4 |
8 inch |
#2.4 |
|
G6 - 9" |
23 3/4 |
14 3/4 |
9 inch |
#2.6 |
