Heavy Duty Solenoid (Includes Surge Protection)
Many starting problems can be traced to an inadequate solenoid. Our Heavy Duty Solenoid solves these problems forever. Model 3010 includes a surge protector to prevent a spike in voltage.
Type SS-2060 Sealed Racing Solenoid
Features:
Water resistant
Double-make or double-break contacts
Capable of handling high and low current requirements
Black impact phenolic casing
Engineering Data
Contacts:
Pole form-SPNO and SPDT
Material-silver alloy
Termination-5/16"-24UNF-2A thread
RATINGS:
Volts DC NO
NC
Cont. Inrush Cont. Inrush
6 200A 600A 100A 300A
12 200A 600A 100A 300A
24 & 36 200A 600A 100A 200A
Coils
Voltage-6 VDC through 48 VDC
Termination-#10-32 UNF-2A thread
Power (approximate)
Continuous 12 watts SPDT, 8 watts SPNO
Connections
Coil isolated (two terminals)
Operate (77°F/25°C)
67% of nominal coil voltage (intermittent)
75% of nominal coil voltage (continuous)
110% max. Safe of nominal coil voltage
COIL DATA
Volts DC Resistance in Ohms
Intermittent Continuous
SPDT SPNO SPDT SPNO
6 2.2 3.3 5.25
12 8.4 13.2 21.0
24 18.4 30 47
General Data
Dielectric Strength
·500 Volts
Temperature Range
·-40°F/-40°C to 149°F/65°C
Mechanical Life (no load)
·100,000 cycles
Electrical Life (rated load-making & breaking 200 amps on NO Contacts)
·50,000 cycles
Mounting Position
·Recommended mounting is vertical plane with coil terminal up
Weight (approximate)
·SPNO-24.0 oz.
·SPDT-26.0 oz.
Duty Cycle
·Continuous
·Intermittent-10 seconds "on" maximum and minimum 60 seconds "off"
One minute "on" maximum and minimum 6 minutes "off"
Hardware Torque Specifications
·Contact Terminal: 60 inch-lbs. max
·Coil Terminal: 12-18 inch-lbs. max.
To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.
SPECIFICATIONS:
Insulated Coil Terminals
Preferred Mounting Position-Coil
